Physio Control Lifepak 15 Redi-Charge Battery Adapter Tray

Lifepak-15-Redi-Charge-Battery-adapter-tray

Additional Images

  • Lifepak-15-Redi-Charge-Battery-adapter-tray

Physio Control Lifepak 15 Redi-Charge Battery Adapter Tray

Product Code 11140-000052USA

0 reviews

In Stock

What's Included?

  • Redi-charge Lifepak 15 battery adapter tray

This charging station will allow you to keep your Lifepak 15 unit fully charged and able to be used in a rescue time and time again. 

Without a fully charged power source, your AED cannot be used to help save the life of a cardiac arrest victim. This is why this Redi-Charge Lifepak 15 Battery Adapter Tray is an essential addition to your kit to make sure your battery is never low on power.

How to Use

The Lifepak 15 AED requires 2 compatible and rechargeable Lithium-Ion batteries, the Red-Charge Battery Adapter Tray as well as the Redi-Charge Lifepak 15 Base and an AC power cord.

Once the adapter tray is slotted into the base, the batteries can be inserted into the appropriate slot. With a charge time of approximately 4.2 hours, the combination of these products allows you to keep up with the maintenance of your Lifepak 15 AED to keep your unit constantly powered and in a state of readiness.

More Information

Think the Redi-Charge Lifepak 15 Battery Adapter Tray could be the product for you? If you have any questions or would like to learn more before you purchase, please contact the defibshop team by calling 800 989 7768.

 Want to know why you should choose us? 

  • Experienced and knowledgeable staff on-hand to offer impartial advice on all things AEDs
  • We have a nationwide training network to deliver training in the use of a defib and CPR
  • Not only providing free battery and pad reminders, we also will replace your electrode pads for free if you use your defib in the first two years after purchase
  • Over 14 years worth of experience as an AED specialist 
  • 5 / 5 Review Score
  • Over 97% of our customers would buy from us again

 

What is an IP rating?

An IP (Ingress Protection) rating classifies the degrees of protection of an electrical item against water and dust. Beginning with IP and followed by two numbers, the first digit is indicative of the item’s resistance to dust and the second is of its resistance to water. Protection against dust is measured from */ 0 up to 6, whereas protection against water is measured from */ 0 up to 8. The protection against these elements increases as the number does, with * / 0 telling us that the item has NO protection against either dust or water.

Why is this important?

The IP rating of a defib will tell you (and us!) whether it is suitable for the environment where it’s most likely to be used; for example, if there is a good chance your defib may be used in an outdoor environment, you will need a unit with a higher IP rating to ensure it can be used regardless the weather or terrain. If you are looking for a defibrillator more suitable for an indoors environment, you can afford to choose one with a lower IP rating, based on the other features that may be more suitable.

When a particular product is “approved” by the FDA, this marks the pass in the premarket approval (or PMA) application of a particular product which has been submitted to the FDA.

To receive approval of a device through a PMA application, the applicant in question must provide reasonable assurance of the device’s safety and effectiveness which is then challenged by the FDA before being approved.

Whilst all AEDs can be used to increase chances of survival and even save a life in the event of a cardiac arrest, FDA approved devices provide that extra piece of mind that the specific unit being used has undergone vigorous and substantial testing to ensure that that particular piece of equipment operates just as it should and provides the most effective care possible.

Many manufacturers perform their own tests on products, but not all defibrillators will undergo the same premarket approval as FDA approved devices and there is no guarantee or stamp of certification if testing has taken place with non-FDA approved products.