Product Code 989803150061USA
- Philips FR3 Card
Compatible with the Philips HeartStart FR3 AED, this Data Card will allow you to store 8 hours of ECG and patient event data directly from your device.
Why choose this product?
Post-rescue data can be incredibly beneficial when providing care following a cardiac arrest. Using the stored data, medical professionals can gain a deeper insight into the condition of the patient’s heart during the rescue and exactly how many shocks were given.
The FR3 Data Card can store up to 8 hours of ECG and patient event data, you can even log 8 hours of voice recording should you need to for a more explanatory overview of the rescue process.
Get in touch
Interested in this product? If you have any questions prior to purchase, feel free to get in touch with our helpful defibshop advisors.
We’re available throughout the week to assist with any queries you may have. To get in touch, call 888 820 0760.
Want to know why you should choose us?
- Experienced and knowledgeable staff on-hand to offer impartial advice on all things AEDs
- We have a nationwide training network to deliver training in the use of a defib and CPR
- Not only providing free battery and pad reminders, we also will replace your electrode pads for free if you use your defib in the first two years after purchase
- Over 14 years worth of experience as an AED specialist
- 5 / 5 Review Score
- Over 97% of our customers would buy from us again
What is an IP rating?
An IP (Ingress Protection) rating classifies the degrees of protection of an electrical item against water and dust. Beginning with IP and followed by two numbers, the first digit is indicative of the item’s resistance to dust and the second is of its resistance to water. Protection against dust is measured from */ 0 up to 6, whereas protection against water is measured from */ 0 up to 8. The protection against these elements increases as the number does, with * / 0 telling us that the item has NO protection against either dust or water.
Why is this important?
The IP rating of a defib will tell you (and us!) whether it is suitable for the environment where it’s most likely to be used; for example, if there is a good chance your defib may be used in an outdoor environment, you will need a unit with a higher IP rating to ensure it can be used regardless the weather or terrain. If you are looking for a defibrillator more suitable for an indoors environment, you can afford to choose one with a lower IP rating, based on the other features that may be more suitable.
When a particular product is “approved” by the FDA, this marks the pass in the premarket approval (or PMA) application of a particular product which has been submitted to the FDA.
To receive approval of a device through a PMA application, the applicant in question must provide reasonable assurance of the device’s safety and effectiveness which is then challenged by the FDA before being approved.
Whilst all AEDs can be used to increase chances of survival and even save a life in the event of a cardiac arrest, FDA approved devices provide that extra piece of mind that the specific unit being used has undergone vigorous and substantial testing to ensure that that particular piece of equipment operates just as it should and provides the most effective care possible.
Many manufacturers perform their own tests on products, but not all defibrillators will undergo the same premarket approval as FDA approved devices and there is no guarantee or stamp of certification if testing has taken place with non-FDA approved products.